In the Twin Cities, frozen plumbing is far from uncommon. When temperatures dip into the single digits or below, your pipes can freeze in a matter of hours. And in a worst-case scenario, they can burst and cause extensive water damage. That’s why it’s so important to prepare your plumbing to withstand sub-freezing temperatures.

If you haven’t yet taken measures to protect your property’s plumbing, there’s no time like the present. Not sure how to get the job done? The experts at Kiser Construction share valuable tips for preventing frozen pipes and plumbing leaks below.

Leave the Heat On

If you’re taking a winter vacation, now is not the time to try to save on your utility bills. Keeping the heat on in your property will help ensure the water inside your plumbing doesn’t freeze and expand.

Though it might be tempting to turn down the thermostat to save a few bucks, it isn’t worth the risk of a burst pipe and extensive water damage. Should you return home to a flood, the cost of water damage cleanup will far outweigh what you might have paid in utility bills while you were gone.

Open Interior Doors

One of the easiest ways to help prevent frozen pipes and water damage is to keep warm air circulating evenly throughout your home or building. Keep your bedroom doors open and your bathroom doors, too, whenever possible.

It’s also a good idea to keep your closet, pantry, and storage room doors open to allow for even heat distribution throughout your property. Since pipes are frequently located inside cabinets, try to keep your cabinet doors open whenever possible to expose your plumbing to warm air.

Let Your Faucets Drip

If you’re worried about frozen pipes, try opening your faucets just enough so that they drip slightly. Keeping your faucets open just a tad helps relieve pressure inside the plumbing system, so if a pipe does freeze, the water won’t expand to the point of bursting it.

If your faucets feature both hot and cold water handles, make sure you open both taps slightly. If you have faucets that feature a single handle (like the kitchen sink type), turn the faucet slightly to the warm side and open it just a tad. 

Add Insulation to Your Plumbing

Most buildings have pipes located in areas without adequate insulation, such as in basements, crawl spaces, and attics. If your plumbing runs through any of these areas, it’s never a bad idea to wrap the pipes with insulation to help prevent them from freezing. You can use:

●        Foam rubber sleeves

●        Fiberglass sleeves

●        Self-seal rubber insulation

●        Foam padding and heavy-duty tape

It’s important to note that although pipe insulation does provide additional protection against burst pipes and water damage, prolonged sub-zero temperatures can still cause your pipes to freeze. For more robust protection, consider applying heating tape or cables to any pipes located in areas without adequate insulation. In the Twin Cities, where temperatures can remain below zero for days on end, added precaution is never a bad idea.

Dealing With Water Damage in the Twin Cities? Contact Kiser Construction

If your home or building has been the victim of a burst pipe or other form of water damage, get in touch with Kiser Construction right away. We specialize in comprehensive water damage cleanup and restoration and can work with your insurance company to help you get coverage. To get started, call our Elk River, MN office today at 763-633-2010 or send us a message.

If your property has suffered a flood, fire, or storm damage and you need immediate cleanup service, please call our 24/7 emergency line now at 612-518-8852.